Someone reported that after upgrading the system from Windows 7 to Windows 10 , the AOC e1659fwu USB Monitor cannot work properly. After restarting computer, the computer screen use for a while, but then it suddenly changes to black. In device manager, there is a yellow exclamation with your USB monitor, and sometimes, it shows the code 43 error that Windows has stopped this device.
There are several methods you can fix the AOC e1649fwu, e1659fwu USB monitor stop working error on Windows 10.
Solutions:
The global brand providing the best display technology in worldwide. 32' and bigger Speaker 144Hz. 1ms FreeSync HD/FHD 4K UHD DisplayPort Speaker. 21:9 Flicker Free IPS. MOST POPULAR MONITOR. Above 40' 2K 25'27' ESSENTIAL MONITOR.
Solution 1: Change USB Ports
If your AOC USB monitor can only keep running for a short time, you can try to plug out your USB cable and changes to another USB ports especially the USB 3.0 port. USB 3.0 port provides more power supply. And if you have another computer, try to use another computer to test your USB monitor.
Related: USB Ports Not Working on Windows 10
Solution 2: Uninstall the USB Monitor Driver
Someone report that after uninstalling DisplayLink driver from device manger, the AOC USB monitor can work properly.
1. Open device manager.
2. Expand Monitors, and you will see the DisplayLink device. If not, you can find it from the Universal Serial Bus controllers or other devices.
3. Right-click it to Uninstall it.
4. Reboot your Computer.
After that, Windows will detect the USB monitor again and install the basic driver for it.
Solution 3: Update AOC USB Monitor Driver
If you find that uninstalling the USB monitor, the problem still remain, you can update the AOC USB monitor driver. And this will also help to fix generic pnp monitor issue.
For updating AOC USB Monitor driver, there are two ways you can do.
Automatic Update AOC USB Monitor Driver
If you have the problem with update the AOC driver yourself, you can select the automatic way. You can use Driver Booster to help you find the DisplayLink driver, download it and update it within 2 clicks. Driver Booster will be the best choice to help you finish this task. As the best driver update software, Driver Booster can download all the missing, outdated drivers at one time, and then update these drivers automatically.
Download, install and run Driver Booster on your computer, and then you can follow these steps.
1. Scan. Driver Booster will scan all your device and its drivers, and then told you how many drivers are latest, how many drivers are out-dated, how many drivers are missing.
2. Update or Update Now. This will help you download all drivers automatically. Of course, you can one driver by finding it from the list.
After downloading finish, it will install the driver automatically.
Manual Update AOC USB Monitor Driver
We know the USB monitor using the DislayLink technology, so if you want to download and update AOC USB driver, you need to find the driver from DisplayLink official site, not the AOC site. So if you want to find it from AOC download center, you will find nothing.
1. Entering the Display Windows Download Center. If you want to use the USB monitor on other system, you can choose other operate system.
2. Choose the latest version of DisplayLink USB Graphics Software for Windows. The right side is the download button.
Aoc Display Drivers Mac
3. After the program downloaded, you can install it by yourself.
Aoc Usb Display Drivers
Solution 4: Troubleshooting the USB Monitor Not Working Issue
Using troubleshooting to fix the hardware error is also an easy and convenient way. This will help fix some simple problems.
Aoc 2243w Display Drivers
1. Type troubleshooting in the search box and you can open the troubleshoot window in Windows 10.
In troubleshoot window, find Hardware and Devices. Click it, and then Run the troubleshooter button will appear. Click it to start checking the AOC USB monitor problem and fix it automatically.
Solution 5: Using an USB HUB Device
If all the things you tried are not the real solution, you can try to use an USB HUB device if you have one. Because the computer does not recognize your USB monitor when you plug it to the USB port. You can plug USB Monitor to the USB HUB, through the USB HUB to connect it to the computer.
So you can follow above solutions to solve your AOC USB Monitor cannot work issue on Windows 10.
More Articles:
Frequently asked questions
- Why does white not look white in my picture?
- Monitor power-light indicator flashes from green to orange constantly and there is nothing on the display. What is the reason of this?
- Is there anyway I can adjust the blurriness on my screen?
- Why does the display on my monitor appear to flicker, bounce or wave?
- How can I minimize the flicker on my screen?
- My screen has gone completely black but the power light is still on (green). What is the reason of this?
- What is the Pixel Policy AOC is offering?
- Why is the display of my monitor blurred or unfocused?
- Monitor displays an “Out of Range” message. What does it mean?
- Why is the Plug & Play function of my monitor not working?
- Why is the power light on my monitor not coming on?
- Why is my computer showing “Adapter default” and “Optimal” as the only options on my refresh rate list?
- How can I obtain parts for my out of warranty monitor?
- I’m using a MAC computer. Do I need to use an adapter? If so, what settings do I use on the adapter?
- Which AOC Monitor products are compatible with VESA® FPMPMI wall mounting standard?
- Why does my monitor display “Input Not Supported”? (LCD monitor only)
Adjust H-Position and V-Position or press hot-key (AUTO).
Check to see that the computer is not on power-saving mode by pressing any key or moving the mouse. Then if there is still no display, this typically indicates that the monitor is not receiving a video signal from the video card in your computer. You should verify this by trying the monitor on a different working system, when you plug the monitor into the computer you should get a display…if the monitor still doesn’t show an image on the different system, this indicates an internal problem with the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.
These problems are caused by using an extension video cable or switch box. You need to plug the monitor's video cable directly to the video card connector on the back of your computer to obtain the best picture quality from the monitor. Also make sure that all the pins of the monitor's video cable are in good condition.
Check the pin connector of your monitor video cable, verify that there are no damaged or bent pins, if everything looks fine; then this would indicate a failure inside the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.
No. You should try to activate the Auto-Adjust feature. If this does not work, please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.
Use the Windows Shut Down screen and activate the AUTO-ADJUST feature of your monitor. You can display the Windows Shut Down screen by pressing START & then Shut Down. After the monitor has performed AUTO-ADJUST, press CANCEL to return to your regular desktop. Refer to the monitor's documentation for instructions on how to activate the Auto-Adjust feature.
For all Windows Operating systems: Go to START button, click on SETTINGS, click on Control Panel. Select the Power Management icon. Under Power Schemes drop-down menu, select - ALWAYS ON.
Your computer may be in screen saver mode, it has instructed the monitor to go to power saving mode, or the the monitor's video cable is not properly connected to the computer.
Another possible cause of this is a locked-up or in-operative computer since the computer is what supplies the monitor with all the display data or information. Move the mouse or press a key to de-activate the screen saver or power saving mode. Check the monitor's video cable and make sure it is snugly connected to the computer.
To see if the computer is operating properly, press the CAPS LOCK key on the keyboard repeatedly while checking the CAPS LOCK light. If the light is not turning ON & OFF, the computer is non-functional. Contact your computer manufacturer for help.
Press the Start button and highlight the “Settings” option.Select the “Control Panel” folder.
Double Click on the “Display” icon on the Control Panel.
Select the “Settings” tab under the “Display Properties” window.
Click on the “Advanced” button.
Click on the “Adapter” tab and you can check, or set the refresh rate from there.
Since your video card is located inside your computer, you will have to contact your computer manufacturer for assistance.
You can find this on a small white sticker label on the back of the monitor.
You can use Windex® to clean the screen and 409® clean the outer casing of the monitor. Please use a 'soft' non-fiberous cloth to clean the screen. Do not use any paper products to clean the screen.
- Why is there no driver for WINDOWS NT?
- Do you have drivers for Windows ME?
- Do you have drivers for Windows XP?
- Do you have drivers for Windows Visa?
- Do you have drivers for Windows 7?
- Do you have drivers for Windows 8?
- Do you have drivers for the Mac?
- Do you have drivers for Windows XP?
Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
Double click on the 'Display' Icon.
Select the 'Settings' tab then click on 'Advanced...'.
Select the 'Monitor' button, then click on 'Change...' button.
Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk...'.
Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.
Click on the 'OK' button, select your monitor model and click on the 'Next' button.
Click on 'Finish' button then the 'Close' button.
Double click on the 'Display' Icon.
Select the 'Settings' tab then click on 'Advanced...'.
Select the 'Monitor' button, then click on 'Change...' button.
Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk...'.
Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.
Click on the 'OK' button, select your monitor model and click on the 'Next' button.
Click on 'Finish' button then the 'Close' button.
Click on the 'Display' Item.
Select the 'Settings' tab then click on the 'Advanced' button.
Select 'Monitor' tab
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active, click on 'Properties' button.
Click on the 'Driver' tab and then click on 'Update Driver...' button.
Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.
Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.
Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive).
Click on the 'Open' button, then click the 'OK' button.
Select your monitor model and click on the 'Next' button.
- If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message, please click on the 'Continue Anyway' button.
Click on the 'Finish' button then the 'Close' button.
Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.
Click 'Personalization' and then 'Display Settings'.
Click 'Advanced Settings...'.
Click 'Properties' in the 'Monitor' tab. If the 'Properties' button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is.
If the message 'Windows needs...' is displayed, as shown in the figure below, click 'Continue'.
Click 'Update Driver...' in the 'Driver' tab.
Check the 'Browse my computer for driver software' checkbox and click 'Let me pick from a list of device drivers on my computer'.
Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:Driver (CD-ROM Drive).
Select your monitor model and click on the 'Next' button.
Click 'Close' → 'Close' → 'OK' → 'OK' on the following screens displayed in sequence.
Click on the 'Display' icon.
Click on the “Change display settings” button.
Click the “Advanced Settings” button.
Click the “Monitor” tab and then click the “Properties” button.
Click the “Driver” tab.
Open the 'Update Driver Software-Generic PnP Monitor' window by clicking on “Update Driver... “and then click the 'Browse my computer for driver software' button.
Select 'Let me pick from a list of device drivers on my computer'.
Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:Drivermodule name (where X is the drive letter designator for the CD-ROM drive).
Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive.
Close all open windows and remove the CD.
Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
Select 'Let me pick from a list of device drivers on my computer'.
Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:Drivermodule name (where X is the drive letter designator for the CD-ROM drive).
Select the 'xxx.inf' file and click the “Open” button. Click the “OK” button.
Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive.
Close all open windows and remove the CD.
Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
Double click on the 'Display' Icon.
Double click on the 'Display' Icon.
Select the 'Settings' tab then click on 'Advanced...'.
Select 'Monitor'
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active. Click on 'Properties' button.
Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'.
Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).
Click on the 'Open' button, then click the 'OK' button.
Select your monitor model and click on the 'Next' button.
If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.